Life cycle assessment

Analysis proves: Trenchless sewer rehabilitation is significantly more environmentally friendly

Press release /

Fraunhofer UMSICHT analyzed the environmental impact of sewer pipe rehabilitation for the companies RelineEurope GmbH and Impreg GmbH. The institute used life cycle assessment to compare the rehabilitation of sewer pipes using the liner method (CIPP: cure-in-place pipe) with the replacement of pipes with new concrete pipes.

© IMPREG
Sewer rehabilitated using the inliner method

There are around 600,000 kilometers of sewage pipes in Germany. Thirty-five percent of these are more than 65 years old, meaning that numerous repairs and renovations are necessary now or in the near future. The liner method enables trenchless rehabilitation of sewage pipes. To do this, the liners, which are not yet hardened and therefore still flexible, are inserted like hoses through the existing manholes into the damaged pipe, then pressed against the old pipe wall from the inside using compressed air and hardened on site with UV light. The wall material is a glass fiber reinforced plastic (GRP) consisting of unsaturated polyester resin and glass fibers, which are enclosed in thermoplastic plastic films (e.g., PE, PE or PVC) for transport and installation.

Liner method has a better environmental balance

Fraunhofer UMSICHT compiled the environmental balances for the various sewer rehabilitation methods. The overall result: The environmental impact can be reduced by half using the liner method compared to replacing the concrete pipes. For example, greenhouse gas emissions are between 54 and 77 percent lower, depending on the diameter of the pipes and the specific installation situation. Other impact categories in the life cycle assessment also show clear advantages. In its analysis, the institute considered the value creation steps: raw materials, manufacturing (energy consumption and waste), transport, installation and end-of-life.

“The positive effects arise less from the manufacture of the liners and more from the reduced environmental impact due to lower installation costs for sewer laying,” explains Dr. Jan Blömer, Department of Sustainability Management and Participation at Fraunhofer UMSICHT. As a rule, no earthworks are necessary, and surface structures (roads, green spaces, etc.) are not damaged and therefore do not need to be restored. Another advantage - which was not taken into account in this life cycle assessment - is that renovation using the liner method takes only one to two days, minimizing the impact on residents and road users.

Last modified: